Three tall arched windows beneath a blue-lit tray ceiling

Window Replacement and Door Installation

Energy rated units from Canadian manufacturers, installed level, sealed for our climate, and trimmed on both sides.

Request Your Quote

Windows & Doors

Comfort, Efficiency and Curb Appeal

Windows and doors are one of the few upgrades that pay you back monthly. A drafty single-pane window loses heat all winter and gains it all summer, and the deteriorating seal on a twenty-year-old double-glazed unit does much the same thing more quietly.

We install energy rated windows and doors from established Canadian manufacturers, ordered to the measured opening rather than fitted from stock sizes with packing behind the trim.

The installation matters as much as the unit. Most of the performance you paid for is decided by whether the rough opening was flashed, shimmed, insulated and sealed correctly, which is work you cannot see once the trim is on.

Finished window and exterior trim viewed from outside
Group of finished basement windows set into a light wall

ENERGY EFFICIENCY

Comfort Starts at the Rough Opening

An energy rated window installed into an unsealed opening performs like a cheap one. Air moves around the frame instead of through the glass, and the draft you were trying to fix simply relocates to the trim line.

Every unit we install gets the opening inspected and prepared: sill flashing, correct shimming so the frame is square and operable, low-expansion foam or backer rod and sealant at the perimeter, then interior and exterior finishing. Ontario's freeze-thaw cycle punishes anything less.

"Most clients notice the draft is gone before they notice the heating bill."

White entry door with a leaded-glass insert and sidelite beside a triple casement window in dark green board-and-batten siding

CURB APPEAL

The First Thing Anyone Sees

Your entry door and front elevation windows set the impression of the whole house. Swapping tired aluminum frames for vinyl or fibreglass, replacing a hollow entry door with an insulated system, or adding a bay or bow window changes the street view immediately.

We help you settle style, colour, grille pattern and hardware against your home's architecture and the daylight you want in each room. Then we handle the exterior capping and the interior casing so the finished opening looks original rather than retrofitted.

"A new entry door and front windows change the house from the street on day one."

What's Included

Scope of Work

Window Replacement (All Types)
Entry Door Systems & Installation
Patio & Sliding Door Installation
French Door Installation
Bay & Bow Window Installation
Interior Casing & Exterior Capping
Flashing, Weatherproofing & Insulation
Hardware & Lockset Selection
Egress Window Enlargement
Energy Rating & Rebate Guidance

Our Process

How Your Windows & Doors Project Works

1

Assessment & Measurement

We inspect the existing units and openings, measure each one, and note which are failing and why.

2

Product Selection

We match product lines to your priorities: energy rating, operation style, colour and budget.

3

Custom Ordering

Units are manufactured to your measured openings rather than fitted from the nearest stock size.

4

Installation

Openings are flashed and prepared, units set level and square, then sealed and insulated at the perimeter.

5

Finishing & Cleanup

Interior casing and exterior capping are completed, old units removed, and every opening checked with you.

The North Point Difference

Why Choose North Point for Windows & Doors

Energy Star Rated Products

We specify Energy Star rated units suited to our climate zone, and explain what the rating actually buys you.

Installation Done to Spec

Flashing, shimming, insulating and sealing are what determine whether a window performs. Our installers do all four on every opening.

Finished Inside and Out

Interior casing and exterior capping are included, so you are not left hiring a second trade to finish the job.

Common Questions

Frequently Asked Questions

Installed replacement windows typically run $500 to $1,500 each, driven by size, operation style, frame material and energy rating. Bay, bow and custom shapes sit above that range. We quote per opening so you can stage the work if you would rather do the house in phases.

Most whole-house window projects take 1 to 3 days on site, at roughly 1 to 2 hours per opening. The longer part is manufacturing, which is generally 4 to 8 weeks after the order is placed and measured.

Ontario and federal rebate programs for energy efficient upgrades open and close periodically, and utility programs vary by provider. We track what is available at the time you order and tell you what your selections would qualify for.

We install several Canadian manufacturers rather than tying ourselves to one line, because the right choice changes with the application. Vinyl suits most replacements, fibreglass suits large spans and dark colours, and wood-clad suits heritage properties where the interior finish matters.

Replacing windows in existing openings at the same size generally does not require a permit. Enlarging an opening, adding a new one, or installing an egress window for a basement bedroom does. We handle the application when one is required.

Client Stories

What Our Windows & Doors Clients Say

Windows & Doors

North Point replaced every window in our home and installed a new front door. The difference in comfort and energy efficiency is remarkable. Our heating bill dropped significantly that first winter.

Patricia & Doug Fraser

Cambridge, ON

Windows & Doors

The bay window they installed in our living room completely transformed the space. More light, better views, and our energy bills actually went down.

Karen Whitfield

Kitchener, ON

You Might Also Be Interested In

Ready to Start Your Windows & Doors Project?

Book a free consultation and get a clear price, a real schedule, and honest answers about your space.

Book Your Consultation
(519) 513-4123info@northpointcreations.ca

Free consultations · 24-hour response to your inquiry · No obligation